City conducting smoke testing in sanitary sewer July 26 to July 30

Posted on: July 22, 2021

Editor’s note: the following information has been supplied by the City of Whitewater.

The City of Whitewater Wastewater Utility will be conducting smoke testing in the sanitary sewer collection system beginning Monday, July 26, 2021, through Friday, July 30, 2021. In case of inclement weather, testing will continue into the following week, or until completed.

The general area affected by smoke testing will include the northeast portion of the City. The western
border will be George St., while the Clay St. and Rice St. extension will be the border to the south. A map of
this area can be found on the City’s website. The testing area is highlighted in yellow.

We appreciate your patience and understanding and will make every effort to minimize the inconvenience
or disruptions this project may have on residents and businesses. If you have any further questions or
concerns regarding smoke testing please call 262-473-0560, Monday through Thursday, 6:00 a.m. – 3:30
p.m. and Friday, 6:00 a.m. – 10:00 a.m.

Those affected should have received a letter with the following information.

Smoke testing is part of the sewer maintenance program in the City of Whitewater. Testing will begin the week of July 26, 2021. In case of inclement weather, testing will continue into the following week, or until completed.

Those affected will receive a letter the week of July 12, 2021. The general area affected by smoke testing will include the northeast portion of the City. The western border will be George St., while the Clay St. and Rice St. extension will be the border to the south. If you are a landlord please notify your tenants of smoke testing.

An important task of the testing will be to locate breaks and defects in the sewer system. Smoke testing consists of placing a blower on top of a sanitary sewer manhole and forcing “smoke” down into the sewer system. The smoke, under pressure from the blower, travels through the sewer system and escapes through any connection, crack, leak, etc., along the way.

During the test you may see smoke coming from vent stacks on buildings or from holes in the ground. Don’t be alarmed. The smoke used for this testing is non-toxic and non-hazardous and is manufactured specifically for this purpose. It leaves no residue or stains, and has no effect on plants or animals.

Smoke should not enter your home; however, if it does, please note the location of the smoke and notify a member of the smoke testing crew working in your area by practicing social distancing by maintaining a distance of at least 6 feet. This smoke could be an indication of a defect in your plumbing system. This defect could allow sewer gases to enter inside your home, which is a potential health hazard. Corrections of such defects on private property are the responsibility of the property owner, and a licensed plumber should be consulted to ensure the proper corrections are made.

Please perform the following tasks to reduce the ability for smoke to enter your home:

You do not need to be home, but you may want to leave a window slightly ajar to promote ventilation in your home.
Make sure all drain traps and plumbing fixtures have water in them. Therefore, fill drains (such as basement floor drains, unused sinks, etc.) with water by running the faucet for 30 to 60 seconds or filling the drain with approximately one gallon of water. This will fill the plumbing trap and prevent entry of smoke. Prepare drains as soon as you receive this smoke testing notice. This only needs to be done once before testing begins.

Please notify us before Thursday, July 22, 2021 if you have any of the following situations: